Fitting H7 bulb

Faults and Technical chat for the Skoda Karoq
Post Reply
Turgold
Posts: 2
Joined: Wed Sep 27, 2023 7:38 pm

Post by Turgold »

Hi, new to this forum and Karoq ownership. Enjoying the car so far - 1.5 TSI DSG SE.
I have found the H7 bulbs on dip beam to be rather innefective and wanted to change to Osram H7 Nightbreaker laser bulbs.
However I am struggling to remove the bulb and holder, I beleive it twists anti clockwise, however I cannot move it. Any tips on how to do this? Thanks

IanW
Posts: 67
Joined: Fri Jan 14, 2022 10:27 am

Post by IanW »

Turgold
Posts: 2
Joined: Wed Sep 27, 2023 7:38 pm

Post by Turgold »

At last, managed to repelace the bulbs. The bulb holder has a release tab at the bottom of the holder. Press it upwards and the bulb and holder are released to slide out backwards . When refitting the bulbholder, ensure that the lugs on either side are located in the coresponding grooves on the light housing assembly and that the wires to the bulb holder are not rapped between the bulbholder and the light housing , especially on the nearside light as it is hard to see .

20231006_142726_resized.jpg

headlight fitting.jpg

Post Reply

  • You may also be interested in...
    Replies
    Views
    Last post